We designed ScubaHides to be a fun, easy and inexpensive way for divers to personalize and protect their tanks, and increase diver identification underwater.

The images are printed on a 10 mill. thick piece of polyethelyne which is placed on the tank without any adhesive.

Then a 5mill. thick shrink-wrap sleeve is slid over the tank and heat shrunk with a normal hairdryer or heat gun.

Because the graphics are printed on the inside of the label, they (and the tank) are protected.  No adhesive is used whatsoever, so removing and replacing the cover is simple and easy with the supplied extra shrink sleeve.

Once you receive your Scuba Hide, they are easy to apply yourself. Simply place the graphics on the tank, slip the clear heat wrap over it, and apply heat with a normal hair dryer to shrink-wrap it tightly to the body of the tank.  To remove, simply score the sleeve with a sharp knife or razor blade and replace with the supplied extra shrink sleeve. PLEASE RECYCLE!

Under normal use, the clear sleeve of your Scuba Hide will stay on your tanks, in and out of the water, for about 8-12 months, or until the annual visual inspection is due.
 

Here are some FAQ's about ScubaHides:
 

1. ScubaHides are not stickers - they are removable and reusable and will last for many years.
2. ScubaHides do not promote the rusting or pitting of tanks. (see below)
3. ScubaHides do work equally well on both aluminum and steel tanks.
4. ScubaHides do fit any tank size tank including 12 and 15 liter. (excluding pony bottles)
5. ScubaHides do not cover VIP inspection stickers or the hydro-testing stamp.
6. ScubaHides do not slip. Once they are on, they won't come off until you cut them off.
7. ScubaHides do not alter buoyancy.
8. ScubaHides are customizable with your graphics and logos.
9. ScubaHides were extensively tested by P.S.I.   Here is their official conclusion: